True Power Systems delivers arc flash analysis, short-circuit studies, and coordination studies for Maryland data centers, federal facilities, manufacturing plants, municipalities, and healthcare institutions. PE-stamped and code-compliant.
Maryland Quick Facts
PE License
Active · State of Maryland
Standards
NFPA 70E · IEEE 1584 · IEEE 242 · ANSI C37 · OSHA 1910
Software Platforms
ETAP · EasyPower · SKM/PTW · CYMCAP
Maryland Services
All studies are performed by a licensed Professional Engineer, delivered with PE stamp, and compliant with NFPA 70E, IEEE 1584, and OSHA 29 CFR 1910.335 requirements.
NFPA 70E compliant arc flash studies with IEEE 1584-2018 calculations, equipment labeling, and PPE recommendations. Required for any Maryland facility where energized electrical work is performed.
NFPA 70E · IEEE 1584 · OSHA
Fault current calculations to verify equipment interrupting ratings are adequate. Required when adding new equipment, upgrading service, or when utility fault current levels have changed.
ANSI/IEEE · NFPA 70 NEC
Time-current curve analysis to ensure protective devices operate in the correct sequence. Critical for facilities with multiple sources, generators, or complex distribution systems.
IEEE 242 · NFPA 70
Power quality studies for facilities with VFDs, motor controls, or non-linear loads. Essential for Maryland wastewater treatment plants, manufacturing facilities, and data centers.
IEEE 519 · IEEE 1159
Steady-state power flow studies to identify voltage regulation issues and verify equipment loading. Critical for planning electrical infrastructure expansions and additions.
IEEE 399
Cable ampacity calculations for underground duct banks using CYMCAP, required for large commercial developments, utilities, and medium-voltage underground distribution projects in Maryland.
CYMCAP · Neher-McGrath
Maryland Markets
Potential Maryland Customer Base
Counts below are the total Maryland establishments per sector across the state — the universe of facilities that may need a power system study, not a TPS client list.
4,986
Manufacturing
113,023 workers
21,589
Healthcare & social assistance
413,723 workers
5,849
Educational services
282,184 workers
1,519
Data centers & hosting
5,519 workers
196,050 total Maryland establishments · Source: U.S. Bureau of Labor Statistics, Quarterly Census of Employment and Wages, 2024 annual averages
Power system studies and Master Service Agreements for Maryland cities, counties, and public agencies. Arc flash compliance for city halls, public works facilities, and transit authorities.
Harmonic analysis and arc flash studies for Maryland water and wastewater utilities. Experience with pump station electrical systems, VFD installations, and SCADA-integrated power distribution.
Arc flash, short-circuit, and coordination studies for Maryland manufacturing plants, food processing facilities, and heavy industrial operations. OSHA compliance documentation included.
Power demand analysis and complete power system studies for Maryland data centers and mission-critical facilities. Capacity planning, redundancy verification, and feasibility studies for new and expanding sites.
Arc flash studies and electrical engineering support for Maryland K-12 schools and universities. Coverage for classroom buildings, athletic facilities, and central plant electrical systems.
Engineering support for Maryland EV charging installations and renewable energy projects, including charger load studies, service capacity analysis, and utility interconnection support.
Maryland Power Landscape
Every power system study TPS delivers in Maryland accounts for the utilities, fault duties, and interconnection requirements specific to the state. This is the landscape our Maryland work sits in.
Maryland sits inside PJM Interconnection, the largest wholesale grid operator in North America, and the state is served by BGE, Pepco, Delmarva Power, Potomac Edison, SMECO, and the Choptank Electric Cooperative on the Eastern Shore. The available fault current at any facility service is set by the serving utility and can shift when that utility upgrades transformers, ties, or substations, which is why short-circuit and arc flash studies should be revisited after any utility-side work.
Maryland operates an OSHA-approved state plan: MOSH (Maryland Occupational Safety and Health), administered by the Maryland Department of Labor, covers both private-sector and state/local government employers. MOSH enforces electrical safety under 29 CFR 1910 Subpart S and treats NFPA 70E as the consensus standard for arc flash risk assessment and equipment labeling. A current, PE-sealed arc flash study is the documentation a MOSH compliance officer or an insurance auditor expects to see.
The authority having jurisdiction for the installation itself is typically the local or county electrical inspection office enforcing the National Electrical Code as adopted in Maryland. Every study True Power Systems delivers in the state is modeled to current IEEE and NFPA methodology and sealed by a Professional Engineer licensed in Maryland.
Regulatory & Grid Context
State Regulator
Maryland Public Service Commission
Maryland PSC
Wholesale Grid Operator
PJM Interconnection
Major Maryland Utilities
Maryland Industrial Corridors
Why TPS in Maryland
True Power Systems holds an active Professional Engineer license in the State of Maryland and serves facilities across the state, from the Baltimore industrial corridor and the federal-research belt around Bethesda and Silver Spring to the Frederick and Hagerstown manufacturing bases and the growing Eastern Shore data-center footprint. Our engineers model every study in ETAP, EasyPower, SKM/PTW, and CYMCAP to current code.
We are registered as a Veteran-Owned Small Business (VOSB) in SAM.gov, satisfying both private-sector and government contracting requirements for Maryland cities, counties, federal agencies, and public utilities.
What Every Study Includes
VOSB & Federal Credentials
UEI: H6HAZKAD4LJ7 · CAGE: 08E02
NAICS 541330 / 541690 / 238210
Active SAM.gov Registration
SDVOSB-eligible per 38 U.S.C. § 8127
Maryland FAQ
Maryland operates a state OSHA plan — MOSH, administered by the Maryland Department of Labor — covering both private-sector and public-sector employers. MOSH enforces electrical safety through 29 CFR 1910 Subpart S, which references NFPA 70E for arc flash risk assessment and equipment labeling.
If workers ever interact with energized equipment — troubleshooting, racking breakers, voltage testing — NFPA 70E calls for an arc flash risk assessment and MOSH expects equipment to carry incident-energy labels. New equipment, a service upgrade, or a change in utility fault current all trigger a new or updated study.
Maryland sits inside PJM Interconnection, with facilities served by BGE, Pepco, Delmarva Power, Potomac Edison, SMECO, and Choptank. The fault current available at your service comes from the utility and changes when the utility upgrades equipment, so short-circuit and arc flash results should be re-checked after utility-side work.
A power system study used for compliance must be sealed by a Professional Engineer licensed in Maryland. True Power Systems holds an active Maryland PE license and stamps every Maryland deliverable.
A complete package covers incident-energy calculations and arc flash boundaries, ANSI Z535 equipment labels, short-circuit and equipment-duty evaluation, protective-device coordination, an as-studied one-line diagram, and a PE-sealed report.
Maryland Inquiries
Ready to get started on a Maryland power system study? Fill out the form and a TPS engineer will respond within one business day with a scope and fee proposal.
Contact TPS
Not in Maryland? TPS is PE-licensed in AL, AR, FL, GA, IL, IN, KY, LA, MD, MI, ND, NV, OH, PA, SC, TN, VA, WA. Find your state →